We use our own and third-party cookies to improve browsing and provide content of interest.

In continuing we understand that you accept our Cookies Policy. You can modify the cookies storage options in your browser. Learn more

I understand

AFQ-evo series

.
Active multifunction filter

AFQ-evo

Cod: AFQ-evo

Description

AFQevo 30

The AFQevo parallel multifunction active filter is the most complete solution for solving power quality problems related to industrial, commercial or service installations with presence of harmonics, consumption of reactive power (usually capacitive) and also phase unbalance. The AFQevo is meant for wall-mounting thanks to its small size to facilitate its installation.

The features and functions implemented are:

  • Filtering capacity of 30 A
  • Reduced metallic enclosure for wall assembly. Its compact dimensions make it easy to install.
  • Range of filters for installations with 3 wires (3W model) or 4 wires (4W model)
  • Multi-range voltage and dual frequency (50/60 Hz).
  • Reduction of harmonic currents up to the 50th harmonic (2,500 Hz).
  • Selection of harmonic frequencies to be filtered so to reach the filter's highest effectiveness.
  • Power factor correction. Both inductive and capacitive currents.
  • Phase current balancing. In the 4W model, it helps to reduce consumption in neutral.

If higher filtering capabilities are required, the system can be expanded with up to 100 AFQevo connected in parallel (the filters must all be of the same 3 or 4-wire model).

AFQevo 100 / 200

The AFQevo cabinet series parallel multifunction active filter is the most complete solution for solving Quality problems related to industrial, commercial or services installations with presence of harmonics, consumption of reactive power (usually capacitive) and also phase unbalance. This AFQevo is meant rack mounting into market standard cabinets, designed to facilitate its installation.
The implemented features and functions are:

  • Filtering capacity from 100 to 200 A for each cabinet.
  • Reduced rack dimensions to be installed easily in standard cabinets.
  • Range of filters for installations with 3 wires (3W model) or 4 wires (4W model).
  • Multirange, dual frequency (50/60 Hz)
  • Reduction of harmonic currents up to the 50th harmonic (2500 Hz).
  • Selection of harmonic frequencies to be filtered so to reach the filter's highest effectiveness.
  • Power factor correction. Both inductive and capacitive currents.
  • Phase current balancing. In the 4W model, it also helps to reduce consumption in neutral.

If higher capacities are required, the system can be expanded with AFQevo racks in parallel (all the filters/racks must be the same model, 3 o 4 wires).

AFQevo

Type

circutor32x32

Contact

CIRCUTOR, SA
Vial Sant Jordi s/n, 08232
Viladecavalls (Barcelona) Spain
Tel: (+34) 93 745 29 00
Fax (+34) 93 745 29 14

Technical Support

(+34) 93 745 29 19

SAT

© 2015 circutor.com. All rights reserved.